Bộ phân tán tốc độ cao 1. Tổng quan Bộ phân tán tốc độ cao, như tên cho thấy, bộ phận làm việc chính của nó là hoạt động tốc độ cao của tấm phân tán và bộ phận khuấy được sử dụng phổ biến nhất của bộ phân tán tốc độ cao được sử dụng trong sản xuất hàng ngày của chúng tôi là bánh công tác đĩa răng cưa (thường được gọi là đĩa phân tán, lưỡi phân tán, v.v.), đĩa phân tán được dẫn động bởi trục phân tán quay tốc độ cao. Vòng quay tốc độ cao của đĩa phân tán làm cho lớp sơn trong xi lanh hiển thị tuần hoàn lăn, và thiết bị đủ năng lượng sẽ tạo ra một xoáy nước lớn. Bột hoặc sắc tố nổi trên đầu dán sơn sẽ sớm rơi xuống đáy xoáy với hình xoắn ốc. Trong khu vực 2,5-5 cm ở rìa của đĩa phân tán, một vùng dòng chảy hỗn loạn được hình thành. Trong
Tên địa điểm:Malaysia Yêu cầu của khách hàng: Phân tán sơn tường ngoài trời, mục đích là tiết kiệm năng lượng. Mô tả hiệu ứng: Độ mịn của sơn tường ngoài trời là 45um, hàm lượng rắn là 65%, 8500kg bùn cho một mẻ, trong quy trình truyền thống, một máy phân tán tốc độ cao 90KW cần chạy 1,5 giờ để hoàn thành, tuy nhiên, công nghệ mới của Rucca, chỉ cần một máy hệ thống phân tán nội tuyến 45KW để chạy 1 giờ, bên cạnh đó, độ mịn tốt hơn.
Tên địa điểm:Kenya Yêu cầu của khách hàng: để sản xuất mực trắng, nâng cao năng lực. Mô tả hiệu ứng: Trong sản xuất mực trắng thông thường, sử dụng máy hệ thống phân tán nội tuyến IDS để phân tán titanium dioxide (TiO2, hàm lượng rắn 35%), 1860KGS titanium dioxide chỉ cần 13 phút để hoàn thành, tốc độ cảm ứng bột đạt đến 150kg / phút, độ mịn có thể đạt tới 20-30um.
Tên địa điểm:Thổ Nhĩ Kỳ Yêu cầu của khách hàng: Máy trộn phân tán tốc độ cao để phân tán huyền phù gốc nước 2000L tập trung đồng đều trước khi nghiền, để giảm kích thước hạt của vật liệu đồng thời, sau đó chuyển sang máy nghiền hạt, kích thước hạt cuối cùng cần đạt đến D90 = 2um, hơn nữa, cải thiện công suất. Mô tả hiệu quả: Máy trộn phản lực có thể trộn cô đặc huyền phù gốc nước (hàm lượng rắn = 50%) đồng đều khoảng sau 45 phút ở tốc độ 1470rpm, sau đó nghiền bùn trong máy nghiền hạt, hiệu quả sẽ được cải thiện, đồng thời, các vấn đề về sơn tĩnh điện, kết tụ và đóng gói trong chất huyền phù được giải quyết triệt để, và kích thước hạt cuối cùng đạt đến D90 = 2um theo yêu cầu của khách hàng.
Tên địa điểm:Trung Quốc Yêu cầu của khách hàng: Để phân tán silicon sử dụng làm vật liệu chống cháy của pin, kích thước hạt cuối cùng của vật liệu được yêu cầu đến nanomet, trong khi đó, để giải quyết ô nhiễm bụi trong xưởng. Mô tả hiệu quả: Từ hút bột đến phân tán nghiền, chỉ cần 10 phút, có thể làm cho kích thước hạt silicon (hàm lượng rắn 30%) đạt đến D90 = 600nm. Bột silicon được cảm ứng vào máy hệ thống phân tán nội tuyến IDS và phân tán, sau đó nghiền bằng máy nghiền hạt, để ổn định sản phẩm. Trong hệ thống Rucca này, nó chỉ cần một máy nghiền hạt, điều đó sẽ tiết kiệm một quá trình mài.
Trường hợp phân tán và nghiền vật liệu mới Tên địa điểm:Canada Yêu cầu của khách hàng: Phân tán và nghiền silicon, kích thước hạt cuối cùng của vật liệu được yêu cầu đến nanomet, và cải thiện công suất. Mô tả hiệu ứng: Hàm lượng rắn của silicon là 30%, để áp dụng hệ thống phân tán nội tuyến IDS 45KW và máy nghiền hạt dọc dòng M, độ mịn có thể đạt tới nanomet sau khi phân tán và mài, cũng tăng công suất.